Skip to content
Summitwave Documentation

Prepare and connect the TX

Connect the network, required audio source and power supply before beginning configuration.

  1. Select the network port

    Use port 1 for LAN configuration and monitoring. Use port 2 when Dante and/or PoE are required.

  2. Connect the audio source

    For Analogue mode, connect a mic/line source to one of the balanced XLR/TRS inputs. For Network Dante, connect port 2 to the Dante network. Demo mode does not require an external audio source.

  3. Power on the TX

    Power the TX through PoE on port 2 (IEEE 802.3af) or USB-C at 5 V. USB-C can also provide backup power.

  4. Wait for start-up

    Wait approximately one minute for the device to complete its start-up process.