In Dante mode, the TX receives audio from a Dante network and assigns it to one or more Auracast streams.
| Configuration per radio |
Channels |
Sample rate |
| High sample rate |
1 |
48 kHz |
| Medium channel count |
2 |
24 kHz |
| Maximum channel count |
3 |
16 kHz |
| Parameter |
Description |
| Audio Mode |
Selects Network Dante as the active audio source. |
| Start Auracast / Stop Auracast |
Starts or stops the transmission. |
| Status indicator |
Shows the current mode and transmission state. |
| Audio level monitor |
Displays the output levels while the stream is running. |
| Parameter |
Description |
Values |
| Stereo Mode |
Enables processing of a stereo signal. |
|
| Stream Configuration |
Sets the channel count and sample rate. |
1 × 48 kHz · 2 × 24 kHz · 3 × 16 kHz |
| Stream Quality |
Selects the required audio quality. Higher settings use more transmission resources. |
High (48 kHz) · Good (32 kHz) · Medium (24 kHz) · Fair (16 kHz) |
| Parameter |
Description |
Values |
| Assistive listening (R1) |
Identifies the stream as assistive listening content. |
|
| Immediate rendering (R1) |
Requests playback with the shortest possible delay. |
|
| Delay (ms, R1) |
Defines an additional playback delay. |
|
| QoS (R1) |
Prioritises robustness or latency. |
Robust · Fast |
| TX Power (R1) |
Sets the transmit power of Radio 1. The maximum transmit power is +10 dBm according to the product datasheet. |
max. +10 dBm |
Depending on the configuration, one to three stream sections are available per radio.
| Parameter |
Description |
Values |
| Channel Name |
The stream name displayed on the receiving device. |
|
| Language (ISO 639-3) |
The language of the programme content. |
deu · eng |
| Program Info |
A short description of the transmitted content. |
|
| Stream Password |
Optional access protection. Leave the field empty for public streams. |
|
| Input Device |
Selects the Dante input channel. |
dante_asrc_ch1 to dante_asrc_ch6 |
