The following specifications are based on the Summitwave RX product datasheet DS-RX-DE, Rev. A (2026-07). Range, frequency response and system latency partly depend on the broadcast and transmitter used.
RF / Auracast
Specification
Radio standard
Bluetooth LE Audio (Core 5.3)
Device mode
Auracast receiver (RX)
Supported broadcasts
Mono · Stereo
Frequency range
2400–2483.5 MHz
Codec
LC3
Typical system latency
40 ms end-to-end · transmitter dependent
Typical range
up to 100 m · transmitter dependent
Channel control
selection using 2 buttons
Audio / operation
Specification
Audio output
3.5 mm jack · TRS and TRRS with CTIA wiring
Use
common headphones and hearing loops
Frequency response
10 Hz–22 kHz · broadcast and mode dependent
Sample rate / bit depth
16 / 24 / 32 / 48 kHz · 16 bit
Output impedance
16–32 Ω
Display
1.2″ OLED
Controls
Power · channel selection · volume +/−
Accessibility
Haptic feedback · easy-to-read display · straightforward operation
Battery / mechanical
Specification
Battery
Li-Po · typ. 3.6 V · 2000 mAh
Runtime / charging time
20 h / 4 h
Charging
Docking station
Dimensions
90 × 60 × 20 mm (W × H × D)
Weight / colour
approx. 100 g · white or black
Operating temperature
−10 °C to +50 °C
Storage temperature
−40 °C to +85 °C
Ingress protection
IP44
Compliance
CE (RED) · EN 62368-1 · RoHS · REACH · WEEE
The typical range of up to 100 m and typical 40 ms system latency depend on the transmitter, broadcast mode, installation and local RF conditions. Test the complete intended coverage area before each event.
