Technical data
The following specifications correspond to the Summitwave TX product datasheet DS-TX-EN, Rev. A (2026-07). Typical values can vary under real-world operating conditions.
| RF / Auracast | Specification |
|---|---|
| Radio standard | Bluetooth LE Audio (Core 6.0) |
| Auracast mode | Broadcast transmitter · up to 6 simultaneous streams |
| Frequency range | 2400–2482 MHz |
| Codec / sample rate / bit depth | LC3 · 16 / 24 / 32 / 48 kHz · 16 bit |
| Transmit power | max. +10 dBm |
| Encryption | AES-CCM · access code per stream |
| Typical range | 100 m |
| Typical end-to-end latency | 40 ms |
| Audio | Specification |
|---|---|
| Analogue inputs | 2 × balanced XLR/TRS · mic/line |
| Audio modes | 2 × mono · mono sum · 1 × stereo (L/R) |
| Nominal line level | +4 dBu |
| SNR / THD+N | ≥ 105 dB · ≤ 0.05% (line at 0 dBu) |
| Internal processing | 48 kHz · 24 bit |
| Frequency response | 20 Hz–20 kHz (±1 dB at 48 kHz) |
| Dante | 6 channels · 100 Mbit/s · additional latency ≤ 4 ms |
| Network / power | Specification |
|---|---|
| Ethernet port 1 | LAN configuration and monitoring |
| Ethernet port 2 | LAN configuration + Dante + PoE (IEEE 802.3af) |
| IP addressing | DHCP · static IP · link-local |
| Management | Password-protected web interface over HTTP/HTTPS |
| Power | PoE (IEEE 802.3af) or USB-C 5 V; USB-C can also provide backup power |
| Power consumption | 7 W max. · 3 W nominal |
| Mechanical / environment | Specification |
|---|---|
| Dimensions / weight | 134 × 134 × 50 mm (W × H × D) · 300 g |
| Enclosure / colour | PETG · white or black |
| Mounting | Wall / ceiling · 1/4″ female thread · mounting plate · cable ties |
| Operating temperature | −10 °C to +50 °C |
| Storage temperature | −40 °C to +85 °C |
| Compliance | CE (RED) · EN 62368-1 · EN 55032 · EN 55035 · RoHS · REACH · WEEE |