Skip to content
Summitwave Documentation

Select and listen to an Auracast stream

The RX receives an available broadcast. It does not require conventional one-to-one Bluetooth pairing with the transmitter.

  1. Connect the audio output

    Fully insert the intended headphones or compatible inductive neck loop into the audio output.

  2. Reduce the volume

    Set a low output level before putting on the headphones or switching the hearing system to the neck loop.

  3. Switch on the RX

    Switch on the device and wait until it is ready for use.

  4. Open the broadcast channels

    Display the available broadcasts or saved favourite channels and follow the information shown on the OLED.

  5. Select the correct channel

    Use the two channel buttons to choose the clearly named broadcast for the room, language or application.

  6. Adjust the volume

    Increase the volume slowly until playback is clear and comfortable.